* THIS WILL NOT FIT INTERGAS RAPID BOILERS *
If you need any technical support on this product, please contact 01527 888000.
This Intergas Non-Telescopic Horizontal Flue comes at a fixed length of 1 meter and is suitable for the HRE, ECO RF, XCLUSIVE & XTREME range of boilers.
It can be cut to the required length depending on wall thickness, but you cannot extend the flue inside the wall. If you have a thicker wall than 1 meter, Intergas do a 2 meter horizontal flue, available to buy in our flues and plume management section ( https://theintergasshop.co.uk/43-flues-plume-management ).
Model Reference:: 084661
Intergas 45° Flue Elbow | 084661 | Concentric 60/100mm The Intergas 45 degree bend short radius elbow is used when connecting flue pipe.
Model Reference:: 084660
Intergas 90° Flue Elbow | 084660 | Concentric 60/100mm
Model Reference:: 082975
Intergas 1000mm Flue Extension (082975) - The Intergas 1000mm Flue Extension fits the Intergas ECO RF, HRE and 'X' range of boilers. *MORE INFORMATION BELOW*
Model Reference:: 082979
Intergas 500mm Flue Extension (60/100mm - including wall clamp) - The Intergas 500mm Flue Extension fits the Intergas ECO RF & HRE boiler range.
Model Reference:: 081295
Intergas Plume Deflector (081295) - The Intergas Plume Deflector is designed to divert flue gas plumes away to a more appropriate position.
Model Reference:: 086890
Intergas Balcony Kit (086890) | The Intergas Balcony Kit is very similar to the Intergas Plume Management Kit but instead of a 90 degree elbow replacing the end of the horizontal flue terminal, there is a straight coupling which allows you to go horizontally forwards with your plume management pipework.
Model Reference:: 081294
Intergas Plume Management Kit (081294) - The Intergas Plume Management Kit (081294) is designed for the latest range of Intergas HRE, ECO RF & X-Range Flues
Model Reference:: 090547
Intergas Vertical Adaptor (090547) - The vertical adaptor is suitable to be used with the Intergas HRE, SB, X Range and OV boilers
Model Reference:: 084661
Intergas 45° Flue Elbow | 084661 | Concentric 60/100mm The Intergas 45 degree bend short radius elbow is used when connecting flue pipe.
Model Reference:: 087910
Intergas Pitched Roof Weather Slate | 087910 | Fits 100mm Ø Intergas Flues The Intergas Pitched Roof Weather Slate is needed where an Intergas vertical flue system exits a pitched roof.
Model Reference:: 082975
Intergas 1000mm Flue Extension (082975) - The Intergas 1000mm Flue Extension fits the Intergas ECO RF, HRE and 'X' range of boilers. *MORE INFORMATION BELOW*
Model Reference:: 082979
Intergas 500mm Flue Extension (60/100mm - including wall clamp) - The Intergas 500mm Flue Extension fits the Intergas ECO RF & HRE boiler range.
Model Reference:: 082973
Intergas Vertical Flue Kit | 082973 | Concentric 60/100mm (PP. Inner/Alu. Outer) The Intergas Vertical Flue Kit is designed for use with the Intergas ECO RF, HRE and 'X' Range of Intergas boilers only. * THIS WILL NOT FIT THE INTERGAS RAPID RANGE *
Model Reference:: 081297
Intergas Horizontal Telescopic Flue Kit | 081297 | Concentric 60/100mm (PP. Inner/Alu. Outer) The Intergas Horizontal Telescopic Flue Kit is designed for use with the Intergas ECO RF, HRE and X-Range of boilers only. The flue terminal can be extended between XXXmm and 520mm and therefore eases installation, as there is no need to cut the flue terminal to...
Model Reference:: 082986
* THIS WILL NOT FIT INTERGAS RAPID BOILERS * If you need any technical support on this product, please contact 01527 888000.
Model Reference:: intergas-flexible-flue-kit
Intergas Flexible Flue Kit | The Intergas Flexible Flue Kit allows an Intergas HRE, ECO RF, Xclusive or Xtreme boiler to be fitted to an existing brick chimney.
Model Reference:: 081298
Intergas Horizontal Telescopic Offset Flue Kit | 081298 | Concentric 60/100mm (PP. Inner/Alu. Outer) The Intergas Horizontal Telescopic Offset Flue Kit is designed for use with the Intergas ECO RF, HRE and X-Range of boilers only. The flue terminal can be extended between XXXmm and 520mm and therefore eases installation, as there is no need to cut the...
Model Reference:: 087372
Intergas Flat Roof Weather Slate (087372) | Intergas Flue Products Available To Buy Online @ The INTERGAS Shop
Model Reference:: 081295
Intergas Plume Deflector (081295) - The Intergas Plume Deflector is designed to divert flue gas plumes away to a more appropriate position.
Model Reference:: 081289
Intergas 50 Degree Offset Flue Elbow For Retro Fit (081289) - The Intergas Offset Elbow (081289) is designed for use with a horizontal flue terminals to throw the flue to a centralised position on HRE & ECO RF boilers. *MORE INFORMATION BELOW*
Model Reference:: 086890
Intergas Balcony Kit (086890) | The Intergas Balcony Kit is very similar to the Intergas Plume Management Kit but instead of a 90 degree elbow replacing the end of the horizontal flue terminal, there is a straight coupling which allows you to go horizontally forwards with your plume management pipework.
Model Reference:: 084660
Intergas 90° Flue Elbow | 084660 | Concentric 60/100mm
Model Reference:: 082980
* THIS WILL NOT FIT INTERGAS RAPID BOILERS * If you need any technical support on this product, please contact 01527 888000.
Model Reference:: 081294
Intergas Plume Management Kit (081294) - The Intergas Plume Management Kit (081294) is designed for the latest range of Intergas HRE, ECO RF & X-Range Flues
* THIS WILL NOT FIT INTERGAS RAPID BOILERS *
If you need any technical support on this product, please contact 01527 888000.
