The Intergas Vertical Flue Kit is designed for use with the Intergas ECO RF, HRE and 'X' Range of Intergas boilers only.
* THIS WILL NOT FIT THE INTERGAS RAPID RANGE *
The Intergas Vertical Flue Kit box contains:
The Intergas Vertical Flue Kit (082973) is a 60/100 concentric flue, consisting of a 60mm diameter inner flue (exhaust) and a 100mm diameter outer duct as standard. The flue can be installed and extended to a total length of up to 10 metres from the boiler to its final termination point. However, for every 45 degree flue bend used you should reduce the maximum length by 1 metre, and for every 90 degree flue bend used reduce maximum length by 1.5 metres.
The Intergas Vertical Flue Kit (082973) is designed for use with the Intergas ECO RF, HRE and 'X' Range of boilers only.
Intergas Vertical Flue Kit Features:
If you have any questions about the Intergas Vertical Roof Terminal (082973) you can contact us or view the Intergas flue brochure here - https://www.intergasheating.co.uk/wp-content/uploads/2018/07/3290-FLUE-BROCHURE-WEB.pdf
Model Reference:: 084661
Intergas 45° Flue Elbow | 084661 | Concentric 60/100mm The Intergas 45 degree bend short radius elbow is used when connecting flue pipe.
Model Reference:: 084660
Intergas 90° Flue Elbow | 084660 | Concentric 60/100mm
Model Reference:: 082975
Intergas 1000mm Flue Extension (082975) - The Intergas 1000mm Flue Extension fits the Intergas ECO RF, HRE and 'X' range of boilers. *MORE INFORMATION BELOW*
Model Reference:: 082979
Intergas 500mm Flue Extension (60/100mm - including wall clamp) - The Intergas 500mm Flue Extension fits the Intergas ECO RF & HRE boiler range.
Model Reference:: 087910
Intergas Pitched Roof Weather Slate | 087910 | Fits 100mm Ø Intergas Flues The Intergas Pitched Roof Weather Slate is needed where an Intergas vertical flue system exits a pitched roof.
Model Reference:: 087372
Intergas Flat Roof Weather Slate (087372) | Intergas Flue Products Available To Buy Online @ The INTERGAS Shop
Model Reference:: 081289
Intergas 50 Degree Offset Flue Elbow For Retro Fit (081289) - The Intergas Offset Elbow (081289) is designed for use with a horizontal flue terminals to throw the flue to a centralised position on HRE & ECO RF boilers. *MORE INFORMATION BELOW*
Model Reference:: 082980
* THIS WILL NOT FIT INTERGAS RAPID BOILERS * If you need any technical support on this product, please contact 01527 888000.
Model Reference:: 081298
Intergas Horizontal Telescopic Offset Flue Kit | 081298 | Concentric 60/100mm (PP. Inner/Alu. Outer) The Intergas Horizontal Telescopic Offset Flue Kit is designed for use with the Intergas ECO RF, HRE and X-Range of boilers only. The flue terminal can be extended between XXXmm and 520mm and therefore eases installation, as there is no need to cut the...
Model Reference:: 087910
Intergas Pitched Roof Weather Slate | 087910 | Fits 100mm Ø Intergas Flues The Intergas Pitched Roof Weather Slate is needed where an Intergas vertical flue system exits a pitched roof.
Model Reference:: 084660
Intergas 90° Flue Elbow | 084660 | Concentric 60/100mm
Model Reference:: 082979
Intergas 500mm Flue Extension (60/100mm - including wall clamp) - The Intergas 500mm Flue Extension fits the Intergas ECO RF & HRE boiler range.
Model Reference:: 086890
Intergas Balcony Kit (086890) | The Intergas Balcony Kit is very similar to the Intergas Plume Management Kit but instead of a 90 degree elbow replacing the end of the horizontal flue terminal, there is a straight coupling which allows you to go horizontally forwards with your plume management pipework.
Model Reference:: 087372
Intergas Flat Roof Weather Slate (087372) | Intergas Flue Products Available To Buy Online @ The INTERGAS Shop
Model Reference:: 082986
* THIS WILL NOT FIT INTERGAS RAPID BOILERS * If you need any technical support on this product, please contact 01527 888000.
Model Reference:: 081286
Intergas 1000mm Plume Management Flue Extension (including wall clamp) - This plume management flue extension is suitable for use with most Intergas boilers.
Model Reference:: 081284
Intergas PMK PP60 90° Elbow (081284) | Intergas Plume Management Products Available @ The INTERGAS Shop
Model Reference:: 081295
Intergas Plume Deflector (081295) - The Intergas Plume Deflector is designed to divert flue gas plumes away to a more appropriate position.
Model Reference:: 082975
Intergas 1000mm Flue Extension (082975) - The Intergas 1000mm Flue Extension fits the Intergas ECO RF, HRE and 'X' range of boilers. *MORE INFORMATION BELOW*
Model Reference:: 081297
Intergas Horizontal Telescopic Flue Kit | 081297 | Concentric 60/100mm (PP. Inner/Alu. Outer) The Intergas Horizontal Telescopic Flue Kit is designed for use with the Intergas ECO RF, HRE and X-Range of boilers only. The flue terminal can be extended between XXXmm and 520mm and therefore eases installation, as there is no need to cut the flue terminal to...
Model Reference:: 084661
Intergas 45° Flue Elbow | 084661 | Concentric 60/100mm The Intergas 45 degree bend short radius elbow is used when connecting flue pipe.
Model Reference:: 090547
Intergas Vertical Adaptor (090547) - The vertical adaptor is suitable to be used with the Intergas HRE, SB, X Range and OV boilers
The Intergas Vertical Flue Kit is designed for use with the Intergas ECO RF, HRE and 'X' Range of Intergas boilers only.
* THIS WILL NOT FIT THE INTERGAS RAPID RANGE *