The Intergas Rapid combines high efficiency in both hot water and central heating modes and Intergas' "budget" combi condenses virtually 100% of the time its producing hot water - an energy-saving feature that’s hard to beat. By adding state-of-the-art OpenTherm controls (such as Honeywell Home T6R or Drayton Wiser Thermostat Kit 1), even more energy can be saved, while increasing your comfort.
The Intergas Rapid is available in two power outputs 25kW and 32kW to suit most residential properties hot water needs. The Rapid can easily be converted to open vent, open vent combi, system boiler and multipoint water heater by a simple change within the parameter settings.
* Please note, if you live in an apartment that’s over 18 metres high, then you can only install a boiler that has a metal flue. The Intergas Rapid's flue is made from aluminium and steel and was the first high-rise compliant boiler available in the UK when the Building Regulations changed in 2019.
Subcategories
There are 21 products.
Model Reference:: 076077
Intergas LPG Conversion Kit 525 (076077) - This is an LPG conversion kit for 30 kW to 40 kW Intergas boilers.
Model Reference:: 076067
Intergas LPG Conversion Kit 480 (076067) - This is an LPG conversion kit for 24 kW to 30 kW Intergas boilers.
Model Reference:: 087372
Intergas Flat Roof Weather Slate (087372) | Intergas Flue Products Available To Buy Online @ The INTERGAS Shop
Model Reference:: 082057
Intergas Rapid Plume Management 90° Bend | 082057 The Intergas Rapid Plume Management 90° Bend is a 60mm diameter metal flue bend, specifically designed for the Intergas Rapid range of boiler flues.
Model Reference:: 093797
Intergas Rapid Rear Spacer Frame | 093797 Rear fixing kit for Intergas Rapid range of boilers. Allows pipework to be run behind the boiler. Suitable for Intergas Rapid 25 and Intergas Rapid 32 (Inc. Rapid Plus models).
Model Reference:: 087617
Intergas Rapid 90° Flue Bend | 087617 | Concentric 60/100mm (Alu. Inner/Alu. Outer) The Intergas Rapid 90° Flue Bend is an all metal flue bend specifically designed for the Intergas Rapid range of boilers.
Model Reference:: 087616
Intergas Rapid 45° Flue Bend | 087616 | Concentric 60/100mm (Alu. Inner/Alu. Outer) The Intergas Rapid 45° Flue Bend is an all metal flue bend specifically designed for the Intergas Rapid range of boilers.
Model Reference:: 082056
Intergas Rapid Plume Management 60° Bend | 082056 The Intergas Rapid Plume Management 60° Bend is a 60mm diameter metal flue bend, specifically designed for the Intergas Rapid range of boiler flues.
Model Reference:: 082055
Intergas Rapid 1000mm Plume Management Extension | 082055 The Intergas Rapid 1000mm Plume Management Extension is suitable for use with Intergas Rapid boilers only.
Model Reference:: 086807
Intergas Rapid Vertical Flue Adaptor | 086807 | | Concentric 60/100mm (Alu. Inner/Alu. Outer) The Intergas Rapid Vertical Flue Adaptor is an all metal flue adaptor specifically designed for the Intergas Rapid range of boilers.
Model Reference:: 087910
Intergas Pitched Roof Weather Slate | 087910 | Fits 100mm Ø Intergas Flues The Intergas Pitched Roof Weather Slate is needed where an Intergas vertical flue system exits a pitched roof.
Model Reference:: 086649
Intergas Rapid 1000mm Flue Extension | 086649 | Concentric 60/100mm (Alu. Inner/Alu. Outer) The Intergas Rapid 1000mm Flue Extension is an all metal flue extension specifically designed for the Intergas Rapid range of boilers. This flue extension can be cut down to a minimum length of 200mm.
