McDonald STEELflow 300 Litre Indirect Unvented Heat Pump Cylinder (CCS300HP)

CCS300HP
£1,019.07
Inc. VAT

The McDonald STEELflow Indirect Unvented Heat Pump Cylinder is manufactured from duplex stainless steel, and specifically designed for use with either air source or ground source heat pumps. It can also be used with gas system boilers using Priority Domestic Hot Water (PDHW).

These cylinders have a large corrugated high efficiency indirect heat exchanger to ensure optimal heat transfer at lower flow temperatures. The coil’s corrugated design provides high heat transfer and flow rates from the heat pump, with faster recovery times than plain coils due to the increased surface area.

Features:

  • High grade duplex stainless steel
  • 25 Year guarantee
  • Large corrugated indirect coil for maximum heat transfer
  • Post weld treatment for maximum durability
  • Low heat losses
  • High density foam insulation
  • Pressure loss on indirect heat pump coil less than 0.4 bar
  • Heat Pump Coil Rating (HWA 002:2020) - 19.22 kW
  • Coil Surface Area - 2.97 m2
Description
All 300 Litre indirect units are supplied with:
  • 22mm Altecnic Inlet Combination Control Set
  • 24 Litre Zimlet Expansion Vessel with Fixing Kit
  • 28mm EPH 2 Port Motorised Zone Valve
  • Altecnic 1/2" T&P Valve
  • 15 x 22mm Tundish
  • ESi High Limit Thermostat
  • Installation Manual
All Units to Following Specification:
  • 90 Degree Elbow on Hot Water Draw Off (22mm compression)
  • Secondary Return (22mm compression)
  • T&P Valve (1/2” Female)
  • Thermostat Pocket (1/2" & NTC Pocket)
  • Low Level Immersion Heater (1 3/4” Female)
  • Heat Pump Coil Flow / Return (1” BSP Female with 28mm Compression Adaptors)
  • Cold Feed (22mm compression)

 

Capacity (L) Height Cold Inlet Heating Flow Return Immersion Mid-Coil Pockets Secondary Return T&P Valve/High Limit Coil Surface Area (m2)
200 1405 180 865 250 190 465 1028 1189 2.97
250 1699 180 865 250 190 465 1340 1501 2.97
300 1924 180 865 250 190 465 1563 1724 2.97
Capacity (L) Weight Empty (kg) Weight Full (kg) Standing Heat Loss (kWh/24h) Standing Heat Loss (W) ErP Energy Rating Heat Pump Coil Rating (kW) Heat Pump Coil Rating (kW) Reheat Time (mins) Reheat Time (mins) -
200 47 236 1.70 71 C 31.50 21.21 14.66 21.12
250 51 280 1.99 83 C 33.08 20.33 17.71 26.68
300 55 331 2.26 94 C 35.44 19.22 21.53 33.63
15 other products in the same category:

Model Reference:: TIHTS

Tesla T-Smart Smart Retrofit Kit For Immersion Heaters (TIHTS)

Tesla T-Smart Smart Retrofit Kit For Immersion Heaters (TIHTS) Developed to be easily retrofitted to all existing immersion heaters with spade terminals (see video in main description), the T-Smart Smart Retrofit Kit easily connects to existing immersion heater wiring. The Tesla T-Smart app has intuitive set-up and operation, allowing control of an...

Price £107.99
More
Stock Due Soon (Please Contact 01686 626 314 For Availability)

Model Reference:: CCS170HPSL

McDonald STEELflow Slimline 170L Ind Unvented HG Cylinder

The McDonald STEELflow Indirect Unvented Heat Pump Cylinder is manufactured from duplex stainless steel, and specifically designed for use with either air source or ground source heat pumps. It can also be used with gas system boilers using Priority Domestic Hot Water (PDHW). These cylinders have a large corrugated high efficiency indirect heat exchanger...

Price £968.40
More
Quantity Remaining:

Model Reference:: TIS-900x450-Vented-UHR

Ultra High Recovery 117 Litre Vented Hot Water Cylinder (900 x 450)

Ultra High Recovery 117 Litre Vented Hot Water Cylinder (900 x 450) - Nicknamed "The Betty" our Ultra High Recovery Copper Vented Hot Water Cylinder was specifically designed by The INTERGAS Shop to replace standard 900 x 450 vented cylinders. This 21st century cylinder is perfect for an Intergas boiler to maximise hot water recovery time and efficiency...

Price £479.99
More
STOCK DUE SOON (Please Contact 01686 626 314 For Availability)

Model Reference:: MX-250-IND-580

Mixergy 250 Litre Indirect Unvented Smart Cylinder | MX-250-IND-580

Mixergy 250 Litre Indirect Unvented Smart Cylinder | MX-250-IND-580 Buy Mixergy Smart Cylinders online from the heating and hot water specialists at The INTERGAS Shop.co.uk Key Specifications: • Height (A) - 1800 mm• Diameter (B) - 580 mm• Weight (empty) - 62 kg• Weight (full) - 304 kg• Coil Rating - 21 kW• Heat Up Time 25% (15-65°C) - 11 Minutes• Heat...

Price £1,883.62
More
Direct From Manufacturer (2-4 Week Delivery)*

Model Reference:: CCS250HP

Mcdonald 250 Litres Stainless Steel High Gain Indirect Unvented Cylinder (CCS250HP)

The STEELflow heat pump unvented cylinder is manufacturedfrom duplex stainless steel, and specifically designed for usewith either air source or ground source heat pumps.It has a high efficiency corrugated coil heat exchanger, toheat the full volume of water held within the cylinder. Thecoil’s corrugated design provides high heat transfer and flowrates...

Price £947.81
More
Quantity Remaining:

Model Reference:: PH-5L-HW

Pump House High Temperature & PRV Pump For Unvented Cylinder Discharge | PH-5L-HW

Pump House High Temperature & PRV Pump For Unvented Cylinder Discharge | PH-5L-HW The Pump House High Temperature & Pressure Relief Valve (PRV) Pump was designed as a solution where the termination of an unvented cylinders D2 discharge pipework is not possible (for example in a basement or cellar). Please note this is not designed to be used for...

Price £811.99
More
STOCK DUE SOON (Please Contact 01686 626 314 For Availability)

Model Reference:: CCS200HP

McDonald 200 Litre Stainless Steel High Gain Indirect Unvented Cylinder (CCS200HP)

The STEELflow heat pump unvented cylinder is manufacturedfrom duplex stainless steel, and specifically designed for usewith either air source or ground source heat pumps.It has a high efficiency corrugated coil heat exchanger, toheat the full volume of water held within the cylinder. Thecoil’s corrugated design provides high heat transfer and flowrates...

Price £949.16
More
Quantity Remaining:

Model Reference:: MX-180-IND-478

Mixergy 180 Litre Indirect Slimline Unvented Smart Hot Water Tank (MX-180-IND-478)

Mixergy 180 Litre Indirect Slimline Unvented Smart Hot Water Tank (MX-180-IND-478) Buy Mixergy Smart Hot Water Tanks online from the heating and hot water specialists at The INTERGAS Shop.co.uk Key Specifications: • Height (A) - 1767 mm• Diameter (B) - 478 mm• Weight (empty) - 44 kg• Weight (full) - 224 kg• Coil Rating - 24 kW• Heat Up Time 25%...

Price £1,707.37
More
Direct From Manufacturer (Approx. 2-4 Week Delivery)

Model Reference:: ESCTL

ESi High Limit Cylinder Thermostat (ESCTL)

ESi High Limit Cylinder Thermostat (ESCTL) - The ESi Controls ESCTL High Limit Cylinder Thermostat is designed to replace a dual cylinder thermostat when using PDHW and using an Intergas NTC Cylinder Sensor.

Price £15.99
More
IN STOCK (Order Weekdays By 4pm For Same Day Dispatch)

Model Reference:: MX-180-IND-580

Mixergy 180 Litre Indirect Unvented Smart Hot Water Tank (MX-180-IND-580)

Mixergy 180 Litre Indirect Unvented Smart Hot Water Tank (MX-180-IND-580) Buy Mixergy Smart Hot Water Tanks online from the heating and hot water specialists at The INTERGAS Shop.co.uk! We only sell a limited range of Mixergy Tanks on this website. Please see the complete Mixergy Tank range on our MWPHS.co.uk website - Complete Mixergy Range For all...

Price £1,740.89
More
Direct From Manufacturer (Approx. 2-4 Week Delivery)

Model Reference:: MX-210-IND-478

Mixergy 210 Litre Indirect Slimline Unvented Smart Cylinder | MX-210-IND-478

Mixergy 210 Litre Indirect Slimline Unvented Smart Cylinder | MX-210-IND-478 Buy Mixergy Smart Cylinders online from the heating and hot water specialists at The INTERGAS Shop.co.uk Key Specifications: • Height (A) - 2081 mm• Diameter (B) - 478 mm• Weight (empty) - 47 kg• Weight (full) - 257 kg• Coil Rating - 24 kW• Heat Up Time 25% (15-65°C) - 12...

Price £1,788.11
More
Direct From Manufacturer (2-4 Week Delivery)*

Model Reference:: TIHTS650

Tesla T-Smart 27" Incoloy 2 1/4" Immersion Heater & Thermostat (TIHTS650)

Features:  Reliable mechanical bipolar safety cut-out Anti-Legionella function Freeze protection function Increased accuracy due to electronic temperature measurement Smart function: advanced software for heating optimization, reduces energy consumption up to 15% Functional temperature controlled by safety software ErP and Eco design compliant...

Price £167.99
More
Stock Due Soon (Please Contact 01686 626 314 For Availability)

Model Reference:: MX-210-IND-580

Mixergy 210 Litre Indirect Unvented Smart Hot Water Tank (MX-210-IND-580)

Mixergy 210 Litre Indirect Unvented Smart Hot Water Tank (MX-210-IND-580) Buy Mixergy Smart Hot Water Tanks online from the heating and hot water specialists at The INTERGAS Shop.co.uk! We only sell a limited range of Mixergy Tanks on this website. Please see the complete Mixergy Tank range on our MWPHS.co.uk website - Complete Mixergy Range For all...

Price £1,800.86
More
Direct From Manufacturer (2-4 Week Delivery)*