Model Reference:: 084661
Intergas 45° Flue Elbow (084661)
Intergas 45° Flue Elbow | 084661 | Concentric 60/100mm The Intergas 45 degree bend short radius elbow is used when connecting flue pipe.
The Intergas Vertical Flue Kit is designed for use with the Intergas ECO RF, HRE and 'X' Range of Intergas boilers only.
* THIS WILL NOT FIT THE INTERGAS RAPID RANGE *
The Intergas Vertical Flue Kit box contains:
The Intergas Vertical Flue Kit (082973) is a 60/100 concentric flue, consisting of a 60mm diameter inner flue (exhaust) and a 100mm diameter outer duct as standard. The flue can be installed and extended to a total length of up to 10 metres from the boiler to its final termination point. However, for every 45 degree flue bend used you should reduce the maximum length by 1 metre, and for every 90 degree flue bend used reduce maximum length by 1.5 metres.
The Intergas Vertical Flue Kit (082973) is designed for use with the Intergas ECO RF, HRE and 'X' Range of boilers only.
Intergas Vertical Flue Kit Features:
If you have any questions about the Intergas Vertical Roof Terminal (082973) you can contact us or view the Intergas flue brochure here - https://www.intergasheating.co.uk/wp-content/uploads/2018/07/3290-FLUE-BROCHURE-WEB.pdf
Model Reference:: 084661
Intergas 45° Flue Elbow | 084661 | Concentric 60/100mm The Intergas 45 degree bend short radius elbow is used when connecting flue pipe.
Model Reference:: 084660
Intergas 90° Flue Elbow | 084660 | Concentric 60/100mm
Model Reference:: 082975
Intergas 1000mm Flue Extension (082975) - The Intergas 1000mm Flue Extension fits the Intergas ECO RF, HRE and 'X' range of boilers. *MORE INFORMATION BELOW*
Model Reference:: 082979
Intergas 500mm Flue Extension (60/100mm - including wall clamp) - The Intergas 500mm Flue Extension fits the Intergas ECO RF & HRE boiler range.
Model Reference:: 087910
Intergas Pitched Roof Weather Slate | 087910 | Fits 100mm Ø Intergas Flues The Intergas Pitched Roof Weather Slate is needed where an Intergas vertical flue system exits a pitched roof.
Model Reference:: 087372
Intergas Flat Roof Weather Slate (087372) | Intergas Flue Products Available To Buy Online @ The INTERGAS Shop
Model Reference:: 082986
Intergas 2m Horizontal Flue Kit (082986) - Intergas 2m Horizontal Flue Kit fits both Intergas HRE & ECO RF Models. The Intergas 2m Horizontal Flue Kit is ideal for thick walls or where access hatches on flue joints are not possible. PLEASE NOTE: DELIVERY ON THIS PRODUCT IS 2-3 DAYS AS IT IS DROP SHIPPED DIRECT FROM INTERGAS *THIS WILL NOT FIT THE...
Model Reference:: 081295
Intergas Plume Deflector (081295) - The Intergas Plume Deflector is designed to divert flue gas plumes away to a more appropriate position.
Model Reference:: 081285
Intergas PMK PP60 60° (2 per box) - this is suitable to be used with the Intergas Boiler range.
Model Reference:: 087372
Intergas Flat Roof Weather Slate (087372) | Intergas Flue Products Available To Buy Online @ The INTERGAS Shop
Model Reference:: 081298
Intergas Horizontal Telescopic Offset Flue Kit | 081298 | Concentric 60/100mm (PP. Inner/Alu. Outer) The Intergas Horizontal Telescopic Offset Flue Kit is designed for use with the Intergas ECO RF, HRE and X-Range of boilers only. The flue terminal can be extended between XXXmm and 520mm and therefore eases installation, as there is no need to cut the...
Model Reference:: 082969
Intergas 1000mm Horizontal Flue Kit | 082969 | Concentric 60/100mm (PP. Inner/Alu. Outer) Intergas 1000mm Horizontal Flue Kit fits Intergas HRE, ECO RF, Xclusive & Xtreme boilers. The Intergas 1m Horizontal Flue Kit is a non-telescopic flue and ideal for thicker walls. PLEASE NOTE: This Flue Kit is NOT designed for the Intergas Rapid range of boilers.
Model Reference:: 082975
Intergas 1000mm Flue Extension (082975) - The Intergas 1000mm Flue Extension fits the Intergas ECO RF, HRE and 'X' range of boilers. *MORE INFORMATION BELOW*
Model Reference:: 087910
Intergas Pitched Roof Weather Slate | 087910 | Fits 100mm Ø Intergas Flues The Intergas Pitched Roof Weather Slate is needed where an Intergas vertical flue system exits a pitched roof.
Model Reference:: 090547
Intergas Vertical Adaptor (090547) - The vertical adaptor is suitable to be used with the Intergas HRE, SB, X Range and OV boilers
Model Reference:: 081286
Intergas 1000mm Plume Management Flue Extension (including wall clamp) - This plume management flue extension is suitable for use with most Intergas boilers.
Model Reference:: 086890
Intergas Balcony Kit (086890) | The Intergas Balcony Kit is very similar to the Intergas Plume Management Kit but instead of a 90 degree elbow replacing the end of the horizontal flue terminal, there is a straight coupling which allows you to go horizontally forwards with your plume management pipework.
Model Reference:: intergas-flexible-flue-kit
Intergas Flexible Flue Kit | The Intergas Flexible Flue Kit allows an Intergas HRE, ECO RF, Xclusive or Xtreme boiler to be fitted to an existing brick chimney.
Model Reference:: 084661
Intergas 45° Flue Elbow | 084661 | Concentric 60/100mm The Intergas 45 degree bend short radius elbow is used when connecting flue pipe.
Model Reference:: 081284
Intergas PMK PP60 90° Elbow (081284) | Intergas Plume Management Products Available @ The INTERGAS Shop
Model Reference:: 081297
Intergas Horizontal Telescopic Flue Kit | 081297 | Concentric 60/100mm (PP. Inner/Alu. Outer) The Intergas Horizontal Telescopic Flue Kit is designed for use with the Intergas ECO RF, HRE and X-Range of boilers only. The flue terminal can be extended between XXXmm and 520mm and therefore eases installation, as there is no need to cut the flue terminal to...
Model Reference:: 082980
Intergas 600mm Horizontal Non Telescopic Flue - This flue is suitable for new Intergas boiler installations. * THIS WILL NOT FIT THE INTERGAS RAPID RANGE *